WARRIOR ASSAULT RECON PLATE CARRIER MK1 COMBO OD GREEN
€252,00 inc. VAT
Specifications
The RPC MK1 COMBO variant comes complete with:
– 1 x Base Recon Plate Carrier
– 1 x Pathfinder Chest Rig
Διαθέσιμο κατόπιν παραγγελίας
Ρωτήστε μας περισσότερα για αυτό το προϊόν
Περιγραφή
The RPC MK1 bring together two of our products the Recon Plate Carrier and the Pathfinder Chest Rig both of which can be warn independently or together as a highly versatile combo.
The RPC is the latest evolution of plate carriers from Warrior Assault Systems. Designed to be a lightweight and versatile low profile armour carrier offering enhanced mobility without compromising protection.
The RPC has been developed to hold medium and large SAPI and ESAPI stand alone plates and the most common 10″ x 12″ I.C.W. plates available. Plate pockets have been backed with 3D mesh for added ballistic performance comfort and dispersal of body heat. The Recon Plate Carrier comes standard with ladder style cummerbunds that attach to the RPCs front via 2 removable ITW SR Clips. This allows rapid access when getting in and out of the RPC (ITW SR Clips have a combined breaking strength of 600lbs per side). The RPCs shoulders can be worn in 3 different configurations as a slick low profile with the addition of Velcro padded shoulders and wrap around sleeve for hydration and comms channelling.
The RPC comes as standard with a removable MOLLE front flap held in place by 2 vertical SQM clips and strong velcro which allows the panel to be removed and replaced with a wide variety of preconfigured weapon-specific pouch panels and Warrior’s new Pathfinder Chest Rig. The RPC integrates with Warrior’s new Back Panel.
Pathfinder Chest Rig W-EO-PCR
The PCR is the latest edition to the Warrior Assault Systems product line. Designed to work as a compact Chest Rig in stand-alone configuration or in conjunction with Warrior’s new Recon Plate Carrier System (RPC).
The PCR accommodates 4 x M4 style mags with adjustable bungee retention which allows AK mags to be easily changed out. There are 2 x small utility pouches. One at either side with elastic loops for storage of chem-lights small torches etc. The front section comes as standard with Warriors Double Elastic Low Profile Mag pouches these are attached with MOLLE and can be easily changed out for any of Warriors full range of pouches such as our DPDA Double Pistol Mag pouch.
The unique feature of the PCR is its ability to attach to Warrior’s new RPC plate carrier. Simply remove the shoulder and rear straps and all the remaining clips line up with the corresponding ITW clips located on the front and sides of the RPC Plate carrier creating a scalable armour platform for low and high vis operations.
Made from genuine US Mil Spec materials and hardware.
SPECS
Hard Armour
Stand alone plates, 250mm x 300mm (10″ x 12″)and SAPI 238mm x 314mm (9.5″ x 12.5″)
ICW plates 250mm x 300mm and SAPI 238mm x 314mm, with Nexus NIJ 3a soft armour.
All Warrior lightweight plate carriers are designed to work with Nexus style SAPI shaped 10″ x 12″ ( 250mm + x 300mm + ) ballistic plates including bevelled edge ceramic plates and smooth edge composite plates. Steel plates with hard edges and corners should be wrapped to protect the internals of the carriers to avoid excessive wear. Warrior Assault Systems will not be held responsible for any damage to a plate carrier from misuse as stated above.
Soft Armour
NIJ Level 3a soft armour
High Quality Threads
Thread quality is fundamental to the construction, durability and strength of tactical equipment.
Two factors have a negative impact on the life Span of threads
1) Mildew is one of the most common factors in the deterioration of military kit, causing it to rot and ultimately results in unacceptable failure.
2) Sunlight has a harmful effect on the performance of threads, and over time causes their deterioration.
Warrior only uses the highest quality US Mil Spec nylon threads imported from the USA which are threated against both UV and Mildew.
- Fiber Resistance to Acid – Good
- Fiber Resistance to Alkali – Good
- Fiber Abrasion Resistance – Excellent
- Fiber Resistance to Heat – 142 deg C (Highest continuous temperature before breakdown)
- Fiber Melting Point – 265 deg C
MIL SPEC Fabric
500D Nylon fabric feature enhanced tear and abrasion resistance, and long lasting durability, 500D Nylon fabric made with solution dyed yarns are inherently stain resistant and easy to clean. MultiCam, Coyote Tan, Ranger Green, Black and A-TACS FG fabrics are all I.R Treated for the lowest signature.
Plastic Hardware
Warrior only uses the highest quality Military rated Clips and accessories.
MOLLE System
This product uses MOLLE to connect to other items creating a modular and adaptive system.
* Products may differ from the picture shown due to product improvements over time
MOLLE Webbing
This product contains MOLLE webbing that will allow you to attach other pouches using the MOLLE system.
- Genuine US Mil Spec Webbing
- 25mm (1 Inch ) Breaking Strain: 1200 lbs
- 38mm (1.5 Inch ) Breaking Strain: 1800 lbs
- 50mm (2 Inch) Breaking Strain: 2200 lbs
Επιπλέον πληροφορίες
| Βάρος | 2,3 kg |
|---|---|
| Color | OD Green |
| Material | 100% Nylon 500D IR |
| Brand | WARRIOR ASSAULT |
